The importance of Occupational Health and Safety studies Essay

The importance of Occupational Health and Safety studies - Essay Example Government as well as private health sectors work hand-in-hand to ensure that appropriate measures are implemented to attain health and safety management in any construction project sites. Lifting operations involves wide range of lifting equipment and have been a causative factor in major injury, if not fatal accidents in construction industry. In April of 2007, the Construction Design and Management Regulations, otherwise known as "the CDM Regulations" were re-introduced. The said regulations aimed to ensure that stakeholders who are directly involved in the construction projects will comply with their health and safety obligations. It seeks to improve the entire management and synchronization of health, safety and welfare all the way through stages of a construction project in order that large number of grave and fatal accidents as well as cases of ill health will greatly reduce. Lifting operation can be defined as an operation concerned about the lifting or lowering (LOLER Regulation 8, 1998) of a load. The load can mean a person or lifting equipment which in turn refers to work equipment used for lifting or lowering of loads, attachments used for anchoring, fixing or supporting it are included. The Lifting Operations and Lifting Equipment Regulations or LOLER (1998) supported by the ACOP and HSE Guidance Safe Use of Lifting Equipment applies over as well as above the universal requirements mandated by the 1998 Provision and Use of Work Equipment Regulations with hazards and risks related with lifting equipment and also the lifting operations. The following are the specific requirements of the regulations: Every employer shall guarantee that: a) lifting equipment is of sufficient in strength and stability for every load; b) all part of a load and attachments must also be of adequate strength. Every employer shall see to it that lifting equipment for lifting persons: a) focus to sub-paragraph (b), prevents worker from being crushed struck or trapped, fall from carrier; b) prevent so far as is practically a person using it, as he carry out activities c) subject to paragraph 2, wear suitable devices to avoid the risk of falling; d) not thereby exposed to harm or danger.Every employer must guarantee that every lifting procedure involving lifting equipment is: a) correctly planned; b) appropriately supervised; as well as c) carried out safely. Before lifting equipment is placed into service by the person, it has to be thoroughly examined by the said person to check the defects, unless: a) lifting equipment was never used before; and b) if and when lifting equipment (for which an EC pronouncement of conformity should (example, the case of an affirmation under the1997 Lifts Regulations) have been represented, the employer has received the said declaration not more than 12 months earlier than the lifting